|
Hyperline FX Aramid fibre braid (AM) grade hoses |
Hyperline FX Stainless steel braid (SS) grade hoses |
Hyperline FX Tube only (TO) grade hoses |
|
| Nominal bore size | 6 - 25 mm | 6 - 25 mm | 6 - 25 mm |
| Nominal bore size | 0.25 - 1 in | 0.25 - 1 in | 0.25 - 1 in |
| Actual bore size | 6.8 - 26 mm (0.27 - 1.023 in) | 6.8 - 26 mm (0.27 - 1.023 in) | 6.8 - 26 mm (0.27 - 1.023 in) |
| Length | 18 m | 18 m | 18 m |
| Length | 60 Ft | 60 Ft | 60 Ft |
| Outside diameter | 9.6 - 31.7 mm (0.378 - 1.25 in) | 9.6 - 31.7 mm (0.378 - 1.25 in) | 9 - 30.3 mm (0.354 - 1.193 in) |
| Max. operating pressure | 62 bar (900 psi) | 88 bar (1280 psi) | 4 bar (60 psi) |
| Burst pressure | 84 - 186 bar (1200 - 2,700 psi) | 120 - 264 bar (1740 - 3,840 psi) | 6 - 12 bar (87 - 180 psi) |
| Certification and compliance | 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 | 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 | 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 |
| Operating temperature | -40 °C to 180 °C (-40 °F to 356 °F) | -73 °C to 260 °C (-100 °F to 500 °F) | -73 °C to 260 °C (-100 °F to 500 °F) |
| Bend radius | 38 - 150 mm (1.5 - 6 in) | 19 - 75 mm (0.75 - 3 in) | 38 - 150 mm (1.5 - 6 in) |
| Braid type | None | ||
| Cover | None | None | None |
| End fitting | BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings | BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings | BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings |
| Vacuum resistance | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) |
PTFE-lined hose for automotive and general purpose applications
Hyperline FX hose is much more flexible than smoothbore hose, due to the patented design of the PTFE liner, and therefore represents a better alternative in applications where improved flexibility is required. Particularly applicable for the tight configurations increasingly necessary in automotive hose and aerospace hose applications, where space requirements are limited.
